The scroll saw as also used to cut the clear Lexan® into an appropriate shape allowing for access to the VSPs.
| To mount the VSP Servos, I used 7A 12 Position Terminal Blocks cut to size, clear Lexan®, Celtec, screws and glue. |
|
|
|
The Celtec and glue were used for the mounting blocks secured directly to the hull, and the screws were used to attach the clear Lexan®. |
|
One piece of clear Lexan® was used to mount all four (4) servos. I used a drill to cut pilot holes, and then my scroll saw to cut out the servo openings. Servo screws (with rubber grommets) were used to secure the servos to the clear Lexan®. The scroll saw as also used to cut the clear Lexan® into an appropriate shape allowing for access to the VSPs. |
|
If you have any suggestions or comments about this site or construction, please send me an email by clicking here!
Copyright © 2003 - 2008 John T. VanderHeiden
Last Updated Sunday, March 07, 2004 6:35:41 AM