In this photograph from bottom to top, you can see the top view of the boat deck, the bow view, the stern view, the top view of the deck, the top view of the bridge deck and finally the top view of the wheelhouse.
|
|
I´ve placed some of the scale drawings on top of the pink foam so you can see them better. The one inch 4´ X 8´ foam sheet will be used to fabricate the hull. In this photograph from bottom to top, you can see the top view of the boat deck, the bow view, the stern view, the top view of the deck, the top view of the bridge deck and finally the top view of the wheelhouse. |
|
|
|
|
|
|
|
|
|
|
|
|
| The top view of the deck is used to draw the outline of the hull onto the pink foam. Eight drawings will be made (4 on each sheet). They will then be cut out and glued together to form the hull plug. |
|
|
|
Here, you can see the large profile view of the scale model. |
If you have any suggestions or comments about this site or construction, please send me an email by clicking here!
Copyright © 2003 - 2008 John T. VanderHeiden
Last Updated Wednesday, December 10, 2003 1:38:55 PM