| There are four (4) double cross bollards on the real boat. I decided to make mine from solid styrene rod and Celtec. |
|
|
After gluing them together and rough sanding ... |
|
... it was time to apply a little primer. Since the inside of the bulwark and deck will be gray in color, the primer paint works great. I wanted to apply some paint to the bulwark prior to gluing the bollards in place. |
|
|
Here is an outside view ... |
| ... and an inside view. There will be more paint applied later after some fine sanding. |
|
|
A stern view ... |
|
... and a bow view. Don´t mind the sloppy paint over spray. The entire boat will be primed prior to final painting. |
|
If you have any suggestions or comments about this site or construction, please send me an email by clicking here!
Copyright © 2003 - 2008 John T. VanderHeiden
Last Updated Monday, February 09, 2004 5:40:07 AM