L.A. Fireboat 2 - How to Scratch Build the Los Angeles Fireboat 2

Los Angeles Fireboat 2
MAIN DECK

Part 10 - Single Bollards

I used Styrene Solid rod and brass rod to manufacture the Single Bollards.
	Cutting each to length, drilling the hole and gluing the pieces together was a pretty straight forward process. Next, it was time to apply a little primer and let dry.
Installation was also pretty simple. I drilled a hole in the deck (forward/aft).
	Gluing will be done later after all painting is complete.
Above is a bow view, and to the right is the stern view.

If you have any suggestions or comments about this site or construction, please send me an email by clicking here!