L.A. Fireboat 2 - How to Scratch Build the Los Angeles Fireboat 2

Los Angeles Fireboat 2
HULL CONSTRUCTION

Part 9 - Removing Foam (continued)

	The remaining foam has been removed from the hull. Here, you can see the lip I left on the edge for mounting/securing the Main Deck.
Here is a better view of the lip looking from the stern. I have also placed the water pump manifold assembly inside so you can see where it will be mounted.
	The next steps in the hull construction process will be fine sanding, priming and painting. But first, I have other things to do inside the hull, and they will be narrated elsewhere on the web site.
For the time being however, I am extremely pleased with the hull! So ... I think I´ll just sit back and marvel.

If you have any suggestions or comments about this site or construction, please send me an email by clicking here!